The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products automatically, complete line include 1 set mask making machine and 1 sets automatic ear loop welding machine.
HITACHI KH180-2 Track Roller includes track roller body, shaft, bushing and caps. HITACHI KH180-2 Track Roller body is supported on the shaft through bushing. On both sides of the track roller body, there are caps and bushing, bushing is over shaft and ca
Established in 2002, one of the most competitive mould manufacturer and injection molding factory in Shanghai, China. Our mould and plastic injection moulding parts covers range of industrial, household application, auto parts, electronic, medical and aer
Products Name:polyester silk 3D air mesh fabricFeatures:This type of mesh cloth is highly breathable and not easily deformed. Good elasticity, moisture-proof, anti-static, or flame-retardant according to customer needs.
Materials are diversified, it is divided into two raw materials, metal and graphite. These two materials have the characteristics of long-term high temperature use without deformation (900~1200 °C) and stable bearing capacity. These materials are especial
Since the density of magnesium alloy is 1.8/cm3, its weight is very small. The parts of magnesium alloy have the following characteristics: light weight, high strength, high rigidity, good heat dissipation, greater ability to bear impact load than aluminu
As the most commonmachining materials, aluminum alloy shows its advantages as follow: low density, light weight, easy machining and good effect of surface treatment. Different types of aluminum alloy materials can be selected according to different proper
1,Self-relieving structure:In case of an abnormal rise of pressure in the valve body cavity,a trunnion ball valve of a self-relieving seat design will automatically relieve excess pressure to the lower pressure side of the valve,while a trunnion ball valv
YSIQ10G suitable for high temperature working environments, suitable for a wide range of industries. YSIQ10G suitable for high temperature working environments, suitable for a wide range of industries. The valve body and the trim are made of high temperat
Coat the spline of the outer universal joint (RF joint) with a 5mm protective agent D6, and then install the spline shaftAfter applying the protective agent, the drive shaft should be stopped for 60 minutes after installation before starting the car can b