Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2017-10-30 15:23
233
Company Profile
NINGBO SHERS ELECTRONIC CO., LTD.By certification [File Integrity]
Contact:Ms. Candy(Mr.)
Email:
Telephone:
Phone:
Area:Zhejiang
Address:Zhejiang
Website: http://nbshers.auto-charge.net/
Model No. | SH-131 |
Feature | Cylinder: 19 MM |
Air flow: 25 LPM | |
DC 12V cigarette light plug with 3M power cable | |
50 CM durable nylon air hose with quick release chuck | |
Easy to read 250PSI pressure gauge | |
Low pressure consumption | |
Accessories: 2 nozzle adapters, 1 sport needle |
Δ Turn compressor's switch on to the "||" position and monitor pressure using the built-in pressure gauge.
Δ When desired pressure is reached, turn off compressor and disconnect hose.
Δ Unplug the power cord from 12 Volt socket and store the hose and cord back into the unit.
WARNINGS:
Δ Do not overheat the unit! If the compressor is not pumping a steady stream of air and appears sluggish or if metal fittings get too warm to the touch, these are indicators that the compressor has been in operation for too long. Immediately turn off the compressor and allow it to cool for approximately 30 minutes before resuming operation. Never leave compressor unattended while in use.
Δ Do not over inflate items beyond their needs. Most car tires will inflate properly between 30 and 35 PSI depending upon the tire. Some racing bicycle tires require pressure in excess of 75 PSI. Other bicycle tires may require substantially lower pressures. This unit is not fitted for high pressure tires such as those used on large commercial trucks.
Δ Do not overinflate products beyond the manufacturer's recommendations.
Δ Never leave compressor unattended while in use.
Δ Keep out of reach of children.