TitleProduct

Pneumatic Diaphragm Pump/Chemical Pump/Solution Pump /Milk Pump

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Fujian

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-01 08:24

  • Browse the number:

    96

Send an inquiries

Company Profile

Fuan Aidi Electric Co., Ltd.

By certification [File Integrity]

Contact:Ms. Jane Lin(Mr.)  

Email:

Telephone:

Phone:

Area:Fujian

Address:Fujian

Website: http://cnseaflo.auto-charge.net/

PRODUCT DETAILS
Pneumatic Diaphragm Pump/chemical pump/solution pump /milk pump
11.3LPM/3.0GPM 55PSI

Description
Run dry without damage (Run Dry Capability)
Quick-connect plug-in ports for easy installation (Hose Kit Included)
Self-priming
Ignition & Thermally Protected

Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor

2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet

3. The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity

Application
1. Yacht / RV/Caravan pressurized water system
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
Motor Voltage 12/24V DC
Type 4 chamber diaphragm pump, self priming, capable of being run dry
Mode Demand or bypass
Certifications Option CE Approval
Liquid Temperature 140°F (60°C) Max.
Priming Capabilities 6 feet (1.8 m)
Max Pressure 55psi (3.8bar)
Max Flow rate 11.3lpm (3.0gpm)
Thermal Overload Protected Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle Intermittent (under different pressure the continuous working time will also be different)
Motor options 2 pin connector
On/off switch
Model Switch GPM/LPM PSI/BAR Max Draw
(A)
Valves Diaphragm Ports Voltage Wire
Connections
SFDP1-030-055-42 Demand 3.0/11.3 55/3.8 7.5 EPDM Santoprene 1/2"-14 MNPT 12V 2-Pin/Leads
SFDP2-030-055-42 Demand 3.0/11.3 55/3.8 4.0 EPDM Santoprene 1/2"-14 MNPT 24V 2-Pin/Leads