TitleProduct

Plg Tray Continuum Dryer

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-06 04:14

  • Browse the number:

    263

Send an inquiries

Company Profile

Zhejiang Sujing Purification Equipment Co., Ltd.

By certification [File Integrity]

Contact:Ms. Yvonne Zha(Mr.)  

Email:

Telephone:

Phone:

Area:Jiangsu

Address:Jiangsu

Website: http://czxggz.auto-charge.net/

PRODUCT DETAILS
WORKING PRINCIPLE
Wet materials are continuously fed by feeder onto the drying tray on the first layer of upper portion of the dryer; rake arm with rake on it will make rotary movement to continuously stir the materials. Along the index spiral line, the materials flow through the surface of the drying tray. Materials in the small plate are transferred to the outer edge, where they fall onto the outer edge of big plate below. In the big plate the materials move to the inside and fall onto the small plate on the next layer from the mouth in the middle. Small and big plates are arranged up and down alternatively, making the materials flow through the whole dryer consistently. In the form of saturated steam, hot water or thermal oil, heating medium are pumped into the hollow drying tray, entering from one end and exported from the other end. Dried materials fall into the bottom and are transferred to the outlet by rake and then discharged. The moisture escapes from the materials and exhausts from the outlet at the top. Moisture in vacuum tray dryer is exhausted from vacuum pump on the top. The dried materials discharged from bottom can be packed directly. By equipping auxiliary equipment such as finned heater, solvent recovery condensers, sack-duster, dry material backmixer and induced draft fan, its drying capacity can be increased, and it can be used to dry paste and heat-sensitive materials and operate heat decomposition and reaction, meanwhile more easily recovering solvent. 
 
FEATURE

1. Easy regulation and good applicability.
By adjusting the thickness of bed of material, rotate speed of main spindle, number of rake arms, type and size of rakes, the drying process can achieve the best. Each layer of drying tray can be respectively pumped into hot medium or cold medium, heating or cooling the materials. The material temperature control is accurate and easy. The residence time of materials can be accurately adjusted. Single flow of material without back-mixing; even drying and stable quality, no need to re-mix.
2. Simple and easy operation.
Starting and closing operation of dryer is simple. When feeding stops, the rake can quickly empty the dryer. Through a special endoscope large inspection door, it is possible to have a very carefully cleaning and observation within the device.
3. Low energy consumption.
Thin layer of materials, low rotate speed of main spindle. Material delivery system needs small power and less power consumption. Using conductive heat to dry, with high thermal efficiency and low energy consumption.
4. Good operating environment; recyclable solvents and dust emissions all meet the requirements.
Type of constant pressure: due to the low air velocity within the apparatus, and the humidity inside the equipment increases with the height, it is difficult for dust to float to the top of the device, so the exhaust from the outlet on the top contains almost no dust.
Type of sealed: equipped with solvent recovery device, can easily recycle organic solvent contained in the wet gas. Solvent recovery device is simple and has high recovery rate. For flammable, explosive, toxic and easy oxidized materials, nitrogen can be used as the gas carrying moisture to conduct closed loop, to make it safe to operate. It is especially suitable for drying of flammable, explosive and toxic materials.
Type of vacuum: tray dryer operated under vacuum is especially suitable for drying heat-sensitive materials.
5. Easy installation and small covering area
The dryer leaves the factory and is transported as a whole. What you need to do is just to hoist it into position. It is very easy to be installed. Because the drying tray is arranged in layers and installed vertically, even large drying area still consumes little area. 
 
TECHNICAL CHARACTERISTICS
1. Drying Tray
- Design pressure: generally 0.4MPa, up to 1.6MPa.
- Maximum operating pressure: generally≤0.4MPa, up to 1.6MPa.
- Heating medium: steam, hot water, thermal oil. When the temperature of drying tray is 100 oC, it uses hot water to do heat; hen the temperature reaches 100oC~150oC, it uses saturated steam≤0.4MPa or superheated steam to do heat; when the temperature is 150oC~320oC it uses heating conducting oil to do heat; when the temperature surpasses 320oC, it uses electric, oil or molten salt to do heat. 
2. Material Transport System
- Rotate speed of main spindle: 1-10 rpm, electromagnetism or variable frequency can achieve stepless speed.
- Rake arm: each drying tray has 2 to 8 rake arms fixed on the spindle.
- Rake leaves: spliced on the rake arm, it can float with the tray to keep in contact with materials. It has many forms.
- Roller: for materials easy to get caked or requiring drying, a roller in appropriate place can enhance heat transfer and drying process.
3. Its shell has three types of constant pressure, sealed and vacuum 
- Type of constant pressure: cylindrical or octagonal, two structures of whole and dimidiate. Main channel for heating medium can both be inside or outside the shell.
- Type of sealed: cylindrical. It can withstand the internal pressure of 5 Kpa. Main channel for heating medium can both be inside or outside the shell.
- Type of vacuum: cylindrical. Its design pressure is 0.1 Mpa. Main channel for heating medium is inside the shell. 
4. Air Heater
Generally it is used in the case of a large amount of evaporation to increase drying efficiency.
 
APPLICABLE MATERIALS
Drying, pyrolysis, combustion, cooling, reaction, sublimation
Organic chemicals, inorganic chemicals, medicine, food, forage, fertilizer.

CERTIFICATES


SERVICES
pre-sale service
We Invite customers to visit our company and communicate on technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
 
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.
During the warranty when equipment have problem in quality like equipment failure and damage, our company offer free maintenance or replacement.